Dyna S Rae-San Adaptor
Uses an existing DYNA S ignition sensor plate and rotor to generate the timing pulses to feed into
A RAE-SAN TAI ignition driver.
The drastically lowers the current through the DYNA S pickups - removing the chance of burning them out.
It gives additional features
Programmable Ignition Advance Curves - 4 select-able
Dwell control - avoids coil overheating and improved spark at high RPM
Programmable RPM Limit - with the advance curves
Easier Starting - Dwell is extended during cranking to fire later giving reduced kick back
Coil Protection -if engine stops on a trigger - coil will be disabled after 20mS
Delayed startup - 2 revolutions required before spark starts to ensure lubrication.
Comes in a waterproof metal box with harness to pretty much plug and play.
Any bike with a current Dyna S system can be catered for.
Note that the timing rotor needs to locked in position.